SoundLevelMeter.co

Classroom Noise Meter

Put the traffic light on the projector and let the class see how loud they are. Green is fine, yellow means getting loud and red means too loud. You choose the limit.

Live sound level meter

Your browser will ask to use the microphone. Sound is measured on your device and never recorded or uploaded.

How to use it in class

  1. Press start and allow the microphone on the computer connected to the projector.
  2. Set the limit. 65–70 dB suits group work. Lower it for quiet reading.
  3. Press full screen so the light fills the board.
  4. Agree on the rule with the class, for example "if it goes red, we pause for ten seconds".

Good limits for different activities

Suggested limits
ActivitySuggested limit
Silent reading, tests45–50 dB
Quiet pair work55–60 dB
Group work65–70 dB
Practical work, games75 dB

The microphone hears the whole room, so place the computer where it picks up the class and not just the nearest table. The light reacts to the average of the last split second, so a single cough will not turn it red for long.

Need a timer as well? onlinetimer.app is a free classroom timer.

Frequently asked questions

How loud should a classroom be?

It depends on the activity. Quiet reading is around 40 to 50 dB, and lively group work often reaches 65 to 75 dB. Many teachers aim for under 70 dB during group work.

Can the class see the number too?

Yes. The current decibel value is shown under the light. In full screen it is large enough to read from the back of the room.

Is anything recorded?

No. The microphone signal is turned into a number on your device many times a second and then thrown away. No audio is stored or sent anywhere.

Why does it say the microphone could not be opened?

Your browser needs permission to use the microphone. Click the microphone or lock icon in the address bar, allow access and press start again. On a phone, also check the browser's microphone permission in the system settings.

Last updated: November 18, 2026